TI-TII Adapter
For converting your Garrett Turbo (commonly found on '80's turbo dodges)
From TI-TII (blow-thru/intercooled) status
This adapter is all one piece
Brand New 6061 Billet Alumn.
Fully drill and deburred ready to bolt-on
the backside has been machined to receive an optional O-ring or silicone
does NOT include the compressor housing
Billet Neon / Stratus Throttle Body Flanges
52mm or 60mm Bore
1/2" thick 6061 billet alumn.
Fully thread, deburred, ready to go
Even includes the much needed AIS port not added by many
not machined all the way thru so you can weld a 2.5" pipe to the back with/out issues
Great for making a new high flowing intake
Threads could be drilled to be used a spacer with Methonal or NOS Injection
$20.00
2.2/2.5 3.0/3.3 Throttle Body Flanges
52mm or 60mm Bore
1/2" thick 6061 billet alumn.
Fully thread, deburred, ready to go
Great for making a new high flowing intake
Threads could be drilled to be used a spacer with Methonal or NOS Injection
4.0L Jeep Throttle Body Flanges
52mm or 60mm Bore
1/2" thick 6061 billet alumn.
Fully thread, deburred, ready to go
Great for making a new high flowing intake
Threads could be drilled to be used a spacer with Methonal or NOS Injection
Billet Vac./Boost Blocks
One Piece Construction
Billet 6061 Alumn.
- (1) 3/8" Main Port
- (1) 1/4" Vac/Boost Port
- (4) 1/8" Vac/Boost Port
- (1) 1/4" NPT Expansion Port
- (2) convient mounting holes
Ports warrented against breaking under normal conditions
Will not replace if abused
note: 1/4" fitting can be used with 1/8" hose if using silicone hose
Carb Spacer
1" thick Billet 6061 Alumn.
for early 80's Dodge/Chrysler Cars with 2.2L
Nice taper Top to Bottom
High Performance replacement for the problematic deteriorating plastic factory spacer
